Mandrel built steel reinforced concrete placement hose for concrete pumps and for palification. Suitable for SCC (Self Compacting Concrete). Available on standard lengths, custom built lengths with drilled ends, assemblies complete with swaged full flow Victaulic fittings 62/64 HRC
Reinforcement: High strength spiral wire.
Working pressure: 100 bar
Burst pressure: 200 bar
Vacuum: 608 mm hg with 0,2% ovalisation
Mandrel built steel reinforced concrete placement hose. Available on standard lengths, custom built lengths with drilled ends, assemblies complete with swaged full flow fittings Victaulic.
Reinforcement: High strength spiral wire.
Working pressure: 85 bar
Burst pressure: 170 bar
Vacuum: 608 mm hg with 0,5% ovalization
Mandrel built bulk material suction and delivery hose suitable for abrasive materials such as cement, chalk, lime and abrasive powders with small granulometry. Suitable for silos and tank trucks
Reinforcement: High tensile textile plies, helix wire embedded.
Working pressure: 5 bar
Burst pressure: 15 bar
Mandrel built highly abrasion resistant sand, corundum, shot and grit blast suction and delivery hose, normally used for surface treatment.
Reinforcement: High tensile textile plies, helix wire embedded.
Working pressure: 10 bar
Burst pressure: 30 bar
Mandrel built bulk material delivery hose suitable for abrasive materials such as cement, chalk and abrasive powders with small granulometry. Suitable for silo discharging and on tank trucks.
Reinforcement: High tensile textile plies.
Working pressure: 6 bar
Burst pressure: 18 bar
Mandrel built highly abrasion resistant sand, corundum, shot and grit blast delivery hose, normally used for surface treatment.
Reinforcement: High tensile textile plies.
Working pressure: 12 bar
Burst pressure: 36 bar
Projection et consolidation à haute pression de crépis et de mélanges de produits abrasifs à petite granulometrie. Équipement de machines à crépis et Spritz –Beton.
Renforcement : insertion de fibre synthétique a haute résistance
Pression de travail: 40 bars
Pression d’éclatement : 105 bars
Mandrel built delivery hose for plaster, grout, slurry, chalk and abrasive materials.
Used on machines Spritz-Beton, for construction of tunnels and in public works.
Reinforcement: High tensile textile plies.
Working pressure: 12 bar
Burst pressure: 36 bar
